GE JGB910 Owner's Manual page 37

Warming Drawer Rack
Clean the rack with detergent and water.
After cleaning, rinse the rock with dean
water and drywith a clean cloth.
Warming Drawer Pan
The warming drawer has a removable pan
for easy cleaning.
Remove the pan, using the side edge
handles and dean itwith detergent and
water. After cleaning, rinse with clean water
and dry with a clean cloth. Replace the pan
in the warming drawer.
Removable Warming Drawer (on some models)
Before performing any adjustments,
deaning or service, disconnect the range
electrical power supply at the household
distribution panel by removing the fuse or
switching off the circuit breaker. Make
sure the warming drawer heating element
is cool.
Most cleaning can be done with the drawer
in place. However, the drawer may be
removed if further deaning is needed. Use
soap and warm water to thoroughly clean.
Toreplacethewanning drawer.
[] Place the left drawer rail around
the inner left rail guide and slide it in
slighdy to hook it.
[] Place the right drawer rail around the
tuner right rail guide and slide it in
slightly to hook it.
[] Slide the drawer all the way in.
Toremove Me warming drawer.
[] Pull the drawer straight out undl
it stops.
[] Press the left rail release up and press
the right raft release down, while
pulling the drawer forward and free.
37