GE Profile JGB900 Owner's Manual And Installation Instructions page 53

www.GEAppliances.com
Possible Causes What To Do
Controlsignals after You forgot to enter a bake * Touch the BAKE pad and desired teml)erature or
entering cooking time temperature or cleaning time. tile SELF CLEAN pad and desired ('lean time.
or start time
Food does notbake Oven controls improperly set. * See tile Using the oven section.
or roast properly
Shelf position is incorrect.
* See the Using the oven section.
Incorrect cookware or cookware * See the Using the oven section.
of hnproper size being used.
Oven thermostat needs * See the Adjust the oven thermostat--Do it yourself[
adjustment.
Se(ti(>15.
Clock not set correctly. * See the Using the clock and timer section.
Aluminum foil used improperly * See the Care and cleaning of the range sectiou.
in the oven.
Oven bottom not securely * See the Installation of the range section.
seated in position.
Food does not Oven controls hnproperly set. * Make sure you touch the BROIL HI/LO pad.
broil properly
Oven door not closed.
* See tl_e Using the oven section.
Improper shelf position
* See the Broiling Guide.
being used.
Food being cooked in a hot pan.
* Use the broiling pan and grid that came with v_>tu"
range. Make sure it ix cool.
CookwaJee not suited for broiling. * Use the broiling l)aU and grid that came with your range.
Alumhmm foil used on the * See the Using the oven secdou.
the broiling pan mad grid has
not been fitted properly mad
slit as recommended.
Oven bottom not securely * See the Installation of the range section.
seated in position.
Oven temperature Oven thermostat * See the Adjust the oven thermostat--Do it yourself!
too hot or too cold needs adjustment, section.
Clock and timer Plug on range is not completely * Make sure electrical plug ix plugged into a live, ln'Opedy
do not work inserted ha the eleclrical outlet, grounded outlet.
A fuse ha your home may be
* Replace
the 1Use or reset the circtfit breaker:
blown or the circuit breaker
tripped.
Oven controls improperly set.
* See the Using the clock and timer section.
53