Thank you for purchasing the RICOH CD-R/RW or DVD+RW/+R drive (hereafter referred to as the ('drive'). In order to ensure the drive's long lasting operating efficiency, it must be properly installed. Please follow these procedures carefully. STEP 1: Before installing the drive, write down its serial number below.
Page 4
Buffer underrun errors which occur when data transfer falls behind the writing operation has been inevitable for CD-R/RW drives. Just Link, which we at Ricoh developed on our own, is a new technology that predicts possible occurrences of buffer underrun errors in advance and automatically avoids them. This technology, ensures a stable writing operation even under...
Page 5
STEP 3: HOW TO USE THE DRIVE The basic procedures for using the drive are listed below. Load the disc 1. Press the eject button. 2. Place the disc on the disc tray 3. Load the disc by pressing the eject button or by lightly pushing in the disc tray. After ejecting the disc, load the tray inside the unit quickly.
* All references to the product in this document are to specifications in effect when the product was released. Copyright RICOH Co.Ltd. All rights reserved.