●
System board (see
●
Fan and heat sink (see
Remove the processor:
1.
Use a flat-bladed screw driver to turn the processor locking screw one-half turn
counterclockwise (1), until you hear a click.
2.
Lift the processor (2) straight up, and then remove it.
NOTE:
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
82
Chapter 4 Removal and replacement procedures
System board on page
Fan/heat sink assembly on page
The gold triangle (3) on the processor must be aligned with the triangle icon (4)
69)
74)