●
Processor (see
●
PC Card assembly (see
Remove the system board:
1.
Turn the computer upside down, with the front toward you.
2.
Remove the Torx T8M2.5×4.0 screw that secures the system board to the base enclosure.
3.
Turn the computer right-side up, with the front toward you.
4.
Disconnect the following cables from the system board:
(1) RJ-45 connector cable
(2) Modem module cable
(3) Bluetooth module cable
(4) USB/audio board cable
5.
Remove the modem module cable (5) from the clip in the system board.
88
Chapter 4 Removal and replacement procedures
Processor on page
75)
PC Card assembly on page
92)