Modem module
Description
Modem module
Before removing the modem module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the keyboard (see
6.
Remove the TouchPad (see
Remove the modem module:
1.
Remove the two Phillips PM2.0×4.0 screws (1) that secure the modem module to the system board.
2.
Disconnect the modem module (2) from the system board by lifting it straight up.
3.
Disconnect the modem module cable (3) from the modem module.
4.
Remove the modem module.
Reverse this procedure to install the modem module.
66
Chapter 4 Removal and replacement procedures
Battery on page
44).
Keyboard on page
60).
TouchPad on page
64).
Spare part number
443899-001