HP 8530p - EliteBook - Core 2 Duo 2.4 GHz Maintenance And Service Manual page 96

Description
For use with the ATI Dual-Core processor
For use with the nVidia Quad Core processor
Before removing the graphics card, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
h.
Remove the graphics card:
1. Position the computer right-side up, with the front toward you.
2. Remove the two Phillips PM2.0×5.0 screws (1) that secure the graphics card to the computer. (The
edge of the board opposite the graphics card slot rises away from the computer.)
86 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
Keyboard (see Keyboard on page
Switch cover (see Switch cover on page
Display assembly (see
Top cover (see Top cover on page
Fan (see Fan on page 79)
Heat sink (see Heat sink on page
44).
50)
46)
60)
65)
Display assembly on page
74)
81)
Spare part number
501117-001
495075–001
68)