Bluetooth Module Cable - HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Maintenance And Service Manual

Bluetooth module cable

NOTE: The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
module cable is included in the Cable Kit, spare part number 487432-001.
Before removing the Bluetooth module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the following:
a.
b.
c.
d.
e.
Remove the Bluetooth module cable:
1. Disconnect the Bluetooth module cable (1) from the system board.
2. Detach the Bluetooth module cable (2) from the speaker. The Bluetooth module cable is attached
to the speaker using double-sided tape.
Reverse this procedure to install the Bluetooth module cable.
88 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive (see Hard drive on page
Keyboard (see Keyboard on page
Switch cover (see Switch cover on page
Display assembly (see
Top cover (see Top cover on page
44).
50)
58)
67)
Display assembly on page
83)
78)