HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Maintenance And Service Manual page 78

Notebook pc
Hide thumbs Also See for 6930p - EliteBook - Core 2 Duo 2.8 GHz:
Table of Contents

Advertisement

5.
Lift the right side of the keyboard shield (1) until it rests at an angle, and then remove the shield
(2) by lifting it straight up.
NOTE:
6.
Release the ZIF connector (1) to which the power button board cable is attached, and disconnect
the power button board cable from the system board.
7.
Release the ZIF connector (2) to which the LED board cable is attached, and disconnect the LED
board cable from the system board.
8.
Remove the switch cover by lifting it straight up (3).
Reverse this procedure to install the switch cover.
68
Chapter 4 Removal and replacement procedures
The keyboard shield is included with the keyboard spare part kit.

Advertisement

Table of Contents
loading

Table of Contents