Audio/Expresscard Assembly - HP 6930p - EliteBook - Core 2 Duo 2.8 GHz Maintenance And Service Manual

Reverse this procedure to install the speaker.

Audio/ExpressCard assembly

Description
Audio/ExpressCard assembly (includes ExpressCard slot, cable, headphone and microphone
connectors, and SD card reader slot)
Before removing the audio/ExpressCard assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the following:
a.
b.
c.
d.
e.
f.
g.
Remove the audio/ExpressCard assembly:
1. Release the ZIF connector (1) to which the audio/ExpressCard assembly cable is attached, and
disconnect the audio/ExpressCard assembly cable from the system board.
2. Lift the right side of the audio/ExpressCard assembly (2) to disconnect it from the system board.
90 Chapter 4 Removal and replacement procedures
Battery on page
Hard drive (see Hard drive on page
Keyboard (see Keyboard on page
Switch cover (see Switch cover on page
Display assembly (see
Top cover (see Top cover on page
Bluetooth module cable (see
Speaker (see Speaker on page
44).
50)
58)
67)
Display assembly on page
83)
Bluetooth module cable on page
89)
Spare part number
482959-001
78)
88)