c. Remove the two Torx T5 M2.5×4.5 screws 1 and the two
d. Use a 4.0-mm socket to remove the two M2.0×10.0
e. Remove the hard drive from the hard drive frame 4.
Removing the Hard Drive from the Hard Drive Frame
f.
g. Remove the upper bezel from the frame 2.
Removing the Hard Drive Upper Bezel
Maintenance and Service Guide
PM2.5×3.5 screws 2 that secure the hard drive to the
hard drive frame.
alignment pins 3 from the back of the hard drive.
Remove the two PM2.0×3.0 screws 1 that secure the
hard drive upper bezel to the hard drive frame.
Removal and Replacement Procedures
5–7