Preparing The Notebook For Disassembly - HP nc4000 - Notebook PC Maintenance And Service Manual

Removal and Replacement Procedures
5.3 Preparing the Notebook for
Disassembly
Perform the following steps before disassembling the notebook:
1. Turn off the notebook.
2. Disconnect the AC adapter and all external devices.
Battery pack, 6 cell, 40 wH
3. Remove the battery pack by following these steps:
a. Turn the notebook bottom side up with the front facing
b. Slide and hold the battery release latch
c. Lift the rear edge of the battery pack up and swing it
d. Remove the battery pack.
Removing the Battery Pack
Reverse the above procedure to install the battery pack.
5–4
Spare Part Number Information
forward.
rear edge of the battery pack releases from the notebook.
forward .
2
Battery Pack
Maintenance and Service Guide
315338-001
to the left. The
1