Removal and Replacement Procedures
5.12 Display Assembly
12.1-inch TFT XGA with wireless device antennae
1. Prepare the notebook for disassembly (Section 5.3).
2. Disconnect the antenna cables from the mini PCI
communications board. Refer to Section 5.6, "Mini PCI
Communications Board," for instructions.
3. Remove the LED switch cover (Section 5.7).
4. Remove the keyboard (Section 5.8).
5. Close the notebook and position the notebook so the rear
panel faces forward.
6. Remove the two T8M2.0×8.0 screws that secure the hinge
covers to the notebook.
Removing the Display Assembly Screws
5–28
Display Assembly
Spare Part Number Information
Maintenance and Service Guide
325509-001