GE Monogram ZDP48L4GWSS Dimension Manual

Monogram. ™
ZDP48L4GWSS—48" Professional Ranges
Dimensions and Specifications (in inches)
ZX22B48WSS
ZX12B48WSS
ZX1B48WSS
35-1/4"-36-3/4"
28-1/4"
Revised 7/97
21-1/4"
12"
1-1/2"
3-1/4"
47-7/8"
These ranges are factory set for either natural gas or
liquid propane gas.
48" Natural Gas Model:
ZDP48N4GWSS–4 gas burners, grill and griddle
48" Liquid Propane Gas Model:
ZDP48L4GWSS–4 gas burners, grill and griddle
Accessory Requirements:
All models require the installation of a backguard. A
backguard should be ordered at the same time as the
range. Both must be on site at the time of installation.
Order one backguard for 48" models:
ZX1B48WSS–1-1/2" high backguard
(required for island installations)
ZX12B48WSS–12" high backguard
ZX22B48WSS–22" high backguard with warming rack
(2 piece)
Advance Planning:
Refer to dimensional drawings for appropriate placement
and necessary clearances when planning
the installation.
• Cabinetry cannot be installed directly above the range.
• This range requires the installation of a vent hood,
30" to 36" above the surface.
– The vent hood must be at least 24" deep.
– The vent hood must be the same width as the range.
– The vent hood blower should provide at least 800
CFM and up to 1200 CFM.
– When installing a range that includes a grill, select a
blower on the high end of the CFM recommendation.
12"
• Working areas adjacent to the range should have
18" minimum clearance between countertop and
cabinet bottom.
8"
• Clearance between range and side wall or combustible
material must be at least 12" on each side.
For answers to your GE Monogram,
GE, Hotpoint and RCA appliance questions, call
3-1/2"
GE Answer Center service, 800.626.2000.
®
Gas Supply
U L
Listed by
Underwriters
R
Laboratories
16"
Cooking Surfa
™ GE Profile, ™
Electric Supp