Removal And Replacement Procedures; Preliminary Replacement Requirements; Tools Required; Service Considerations - HP 6730b - Compaq Business Notebook Maintenance And Service Manual
Hp compaq 6735b notebook pc and hp compaq 6730b notebook pc - maintenance and service guide
Hide thumbs
Also See for 6730b - Compaq Business Notebook:
- Maintenance and service manual (173 pages) ,
- Quickspecs (41 pages) ,
- Overview (37 pages)
Table of Contents
Advertisement
4
Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
●
Flat-bladed screwdriver
●
Magnetic screwdriver
●
Phillips P0 and P1 screwdrivers
●
Torx T8 screwdriver
●
5.0-mm nut driver
Service considerations
The following sections include some of the considerations that you must keep in mind during
disassembly and assembly procedures.
NOTE:
As you remove each subassembly from the computer, place the subassembly (and all
accompanying screws) away from the work area to prevent damage.
Plastic parts
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when
handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Preliminary replacement requirements
39
Advertisement
Table of Contents
