Restoring Factory Settings In Computer Setup - HP 6730b - Compaq Business Notebook Maintenance And Service Manual
Hp compaq 6735b notebook pc and hp compaq 6730b notebook pc - maintenance and service guide
Hide thumbs
Also See for 6730b - Compaq Business Notebook:
- Maintenance and service manual (173 pages) ,
- Quickspecs (41 pages) ,
- Overview (37 pages)
Table of Contents
Advertisement
NOTE:
keyboard to navigate and make selections in Computer Setup.
●
●
●
2.
Press
3.
Select the File, Security, Diagnostics, or System Configuration menu.
To exit Computer Setup menus, choose one of the following methods:
●
To exit Computer Setup menus without saving your changes, click Exit in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Ignore changes and exit, and then press enter.
– or –
●
To save your changes and exit Computer Setup menus, click Save in the lower-left corner of the
screen, and then follow the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
Your changes go into effect when the computer restarts.
Restoring factory settings in Computer Setup
NOTE:
Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Turn on or restart the computer, and then press
message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select File > Restore defaults.
4.
Follow the on-screen instructions.
5.
To save your changes and exit, click Save in the lower-left corner of the screen, and then follow
the on-screen instructions.
– or –
Use the arrow keys to select File > Save changes and exit, and then press enter.
Your changes go into effect when the computer restarts.
104 Chapter 5 Computer Setup
You can use either a pointing device (TouchPad, pointing stick, or USB mouse) or the
To select a menu or a menu item, use the keyboard arrow keys and then press enter, or use
a pointing device to click the item.
To scroll up and down, click the plus sign (+) or the minus sign (-) in the upper-right corner of
the screen.
To close open dialog boxes and return to the main Computer Setup screen, press esc, and
then follow the on-screen instructions.
f10
to enter BIOS Setup.
f10
to enter BIOS Setup.
esc
while the "Press the ESC key for Startup Menu"
Advertisement
Table of Contents
