c.
Optical drive (see
d.
Keyboard (see
e.
Switch cover (see
f.
Fan (see
Fan on page
g.
Heat sink (see
h.
Display assembly (see
i.
Top cover (see
j.
System board (see
k.
PC Card/audio board assembly (see
Remove the modem module:
1.
Turn the PC Card/audio board assembly upside down.
2.
Remove the two Phillips PM2.5×3.0 screws (1) that secure the modem module to the PC Card/
audio board assembly.
3.
Lift the modem module (2) straight up and remove it.
Reverse this procedure to install the modem module.
Optical drive on page
Keyboard on page
64)
Switch cover on page
71)
Heat sink on page
72)
Display assembly on page
Top cover on page
81)
System board on page
PC Card/audio board assembly on page
62)
70)
76)
88)
Component replacement procedures
91)
93