NETGEAR XAVN2001 - Powerline AV 200 Wireless-N Extender Installation Manual

Room 1
Powerline AV 200 Adapter*
( XAV2001 )
Router
*Compatible Powerline and HomePlug AV certified devices include the NETGEAR XAV101, XAV1004, XAV2001, XAV2501, and XAVN2001.
For a complete list of AV certified devices, go to
www.homeplug.org/certified_products
Powerline Adapters
Room 2
LEDs
Ethernet
port
Factory
Reset
Security
Powerline AV 200
On/Off
Wireless-N Extender
XAVN2001
( )
(see Setup instructions
on the back of this install guide)
LED Descriptions
Computer
Item
Power LED
Powerline
LED
Ethernet LED
Wireless LED
For information about the buttons on your Powerline devices,
see Troubleshooting
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the
LEDs
label of your product and use it to register your product at
Security
http://www.NETGEAR.com/register
Factory
before you can use our telephone support service.
Reset
Registration via our website is strongly recommended.
Go to http://kbserver.netgear.com
Ethernet
support For additional information about setting up,
.
port
configuring, and using your Powerline AV 200 Wireless-N
Extender, see the XAVN2001 User Manual
Powerline AV 200
Powerline AV 200
Wireless-N Extender
GPL may be included in this product; to view the GPL license
Adapter
XAVN2001
( ) agreement go to ftp://downloads.netgear.com/files/
XAV2001
( )
GPLnotice.pdf.
For complete DoC please visit the NETGEAR EU
Declarations of Conformity website at:
app/answers/detail/a_id/11621/.
Description
Solid green. The electrical power is on.
Solid amber. Power saving mode. The XAVNB2001 goes into
power saving mode when no RJ45 cable is connected and
there is no associated wireless device.
Off. There is no electrical power.
Solid. The adapter is connected to a Powerline network.
Off. The adapter is in power saving mode or has not found any
other compatible device(s) using the same encryption key.
Use the Pick-a-Plug feature to pick the electrical outlet with the
strongest link rate, indicated by the color displayed by the
LED:
Safety Information:
Green: Link rate > 80 Mbps (Best)
AC input: 100-240V~, 250mA or 0.25A (Max)
Amber: Link rate > 50 and < 80 Mbps (Better)
Operating temperature: 0C~40C
Red: Link rate < 50 Mbps (Good)
©2010 by NETGEAR, Inc.. All rights reserved. NETGEAR and the NETGEAR logo
Solid. The Ethernet (LAN) port is linked.
are registered trademarks of NETGEAR, Inc. in the United States and/or other
Off. There is no Ethernet connection.
countries. Other brand and product names are trademarks or registered
trademarks of their respective holders. Information is subject to change without
notice.
This LED is only on the Powerline AV 200 Wireless Extender.
Solid. The wireless radio is on.
Off. The wireless radio is disabled.
on the back of this guide.
Installation Guide
Powerline AV 200 Wireless-N Extender Kit XAVNB2001
. Registration is required
Package Contents
for product updates and Web
Powerline AV 200
Powerline AV
Wireless-N Extender
200 Adapter
XAVN2001
. (
XAV2001
( )
http://kb.netgear.com/
Resource CD
WARNING!! DO NOT plug Powerline devices
into a power strip.
August 2010
)
Ethernet
cables