NETGEAR XAVN2001 - Powerline AV 200 Wireless-N Extender Installation Manual

Existing Powerline Network
Room 1 Room 2
Powerline
AV 200 Adapter*
Powerline
AV 200 Adapter*
*Compatible Powerline and HomePlug AV certified devices include NETGEAR Powerline devices, the NETGEAR XAV101, XAV1004, XAV2001, XAV2501, and
XAVN2001. For a complete list of AV certified devices, go to www.homeplug.org/certified_products.
Powerline Adapters
Add a Wireless Extender
Room 3
Ethernet port
Factory Reset
Powerline AV 200
Wireless-N Extender
LED Descriptions
Item
Power LED
Powerline
LED
Ethernet LED
Wireless LED
For information about the buttons on your Powerline devices,
see
Technical Support
Thank you for selecting NETGEAR products.
1. Wireless LED
After installing your device, locate the serial number on the
4
2. Ethernet LED
2 3
label of your product and use it to register your product at
1
3. Powerline LED
http://www.NETGEAR.com/register
4. Power LED
before you can use our telephone support service.
Registration via our website is strongly recommended.
Go to http://kbserver.netgear.com
Security
support . For additional information about setting up,
On/Off
configuring, and using your Powerline AV 200 Wireless-N
Extender, see the XAVN2001 User Manual
GPL may be included in this product; to view the GPL license
Powerline AV 200 Wireless-N Extender
agreement go to
GPLnotice.pdf.
For complete DoC please visit the NETGEAR EU
Declarations of Conformity website at:
Description app/answers/detail/a_id/11621/.
Solid green. The electrical power is on.
Solid amber. Power saving mode. The XAVNB2001 goes into
power saving mode when no RJ45 cable is connected and
there is no associated wireless device.
Off. There is no electrical power.
Solid. The adapter is connected to a Powerline network.
Off. The adapter is in power saving mode or has not found any
Safety Information:
other compatible device(s) using the same encryption key.
AC input: 100-240V~, 250mA or 0.25A (Max)
Use the Pick-a-Plug feature to pick the electrical outlet with the
strongest link rate, indicated by the color displayed by the Operating temperature: 0C~40C
LED:
Green: Link rate > 80 Mbps (Best) This symbol was placed in accordance with the European Union
Directive 2002/96 on the Waste Electrical and Electronic Equipment
Amber: Link rate > 50 and < 80 Mbps (Better)
(the WEEE Directive). If disposed of within the European Union, this
Red: Link rate < 50 Mbps (Good)
product should be treated and recycled in accordance with the laws of
your jurisdiction implementing the WEEE Directive.
Solid. The Ethernet (LAN) port is linked.
Off. There is no Ethernet connection.
©2010 by NETGEAR, Inc.. All rights reserved. NETGEAR and the NETGEAR logo
are registered trademarks of NETGEAR, Inc. in the United States and/or other
countries. Other brand and product names are trademarks or registered
This LED is only on the Powerline AV 200 Wireless Extender.
trademarks of their respective holders. Information is subject to change without
Solid. The wireless radio is on. notice.
Off. The wireless radio is disabled.
Troubleshooting on the back of this guide.
Powerline AV 200 Wireless-N Extender XAVN2001
. Registration is required
Package Contents
for product updates and Web
.
ftp://downloads.netgear.com/files/
Resource CD
http://kb.netgear.com/
WARNING!! DO NOT plug Powerline
devices into a power strip.
August 2010
Installation Guide
Powerline AV 200
Wireless-N Extender
(XAVN2001)
Ethernet
cable