GE CGS980 Owner's Manual & Installation Instructions page 47

Installation Instructions
[] ELECTRICAL CONNECTIONS (CONT.)
B. Usage Situations where Appliance Power Cord will
be Disconnected Frequently.
Do not use an adapter plug in these situations because
disconnecting of tile power cord places undue strain on
tile adapter and leads to eventual taihu'e of tile adapter
ground terminal, The customer should have the two-
prong wall receptacle replaced with a three-prong
(gro/mding) receptacle by a qualified electrician
befl_re using tile appliance,
Tile installation of appliances designed fin" mobile
home installation must confln'm with tile Manufactured
Home Construction and Safety Standard, Title 94 CFR,
Part 3280 (%rmerly tile Federal Standard %r Mobile
Home Construction and Satiety, Title 24, HUD, Part
280) o_; when such standard is not ai)plicable, the
Standard for Manufactured Home Installations, latest
edition (Manutacmred Home Sites, Communities and
Set-Ups), ANSI A225.1, latest edition, or with local
codes. In Canada, mobile home installation must be
in accordance with tile cmTent CAN/CSA Z240/MH
Mobile Home Installation Code,
Electric Disconnect
• i,ocate disconnect i)lug on tile range back.
• Pinch sides of connector and pull out of range back.
[] SEAL THE OPENINGS
Seal an) openings in tile wall behind tile range and in tile
floor under tile range, when hookui _)s are completed.
[] ASSEMBLE SURFACE BURNERS
[] Burner Heads
Place burner heads over tile electrodes on tile
cooktop, in tile correct locations according to their
size. There is one small, one medium, one extra lmge
and one dual flame extra lmge burner head.
Mediun_head [ [ Small head
Ext _= = _a
Frontof range
extra largehead
[] ASSEMBLE SURFACE BURNERS
(CONT.)
Frontleft, backright and backleft burners
Burner cap
chamber _c___. -_
Burner base
Make surethe slot in the
burnerhead is positioned
overthe electrode.
Frontright burner
Burner cap
Burner
@
head
Burner
baae
Electrode
Makesurethe holein theburnerhead
assembly is positioned overthe electrode
andthatthe burnerheadis fullyinserted
insidethe burnerbase.A smallgapbetween
the baseandheadis normal.
[] Oval (Center) Burner Head/Cap Assembly
Place tile owd (center) head/cap assembly over tile
electrode on tile cooktop.
Ovalheadand cap Make surethe slot in the
assembly burnerhead is positioned
overthe electrode.
Frontof range
Electrode
[] Caps
Place the matching size caps onto tile burner bases
or heads.
Extralargecap L_. _ DWdl f lame extra
Frontof range largecap
Make sure that tile heads and caps are replaced in
tile correct h)cations.
[_] Grates
Place the side and center grates on the cooktop.
These grates are position specific. The unde_ides of
the side grams are marked "OUTSIDE." The cenmr
grate can be interchanged fl'ont to back.
Outsidegrate Centergrate Outsidegrate
CAUTION: to not
o perate
the
burner without all burner parts in place.
47