GE CGS980 Owner's Manual & Installation Instructions page 32

Care and cleaning of the range.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip device
is re-engaged properly when the range is replaced. Failure to take this precaution could
result in tipping of the range and cause injury.
Front rigL burner
\
Burner cab
3urnerhead
Electrode __
Burnerbase
Make sure the hole in the burner
head is positioned over the electrode
and that the burner head is fully
inserted inside the burner base,
A smafigap between the base and
head is normal
Frontleftburner DaCK gn[Durner
and back left burner
Stabili__ng
rleoQle o[
[WIS[-[IB [0
unc_gme
smau r _Le m
menurne
Burnerbase _Electrouc neaa.
Make sure the s,ot in the bumer head
is positioned over the
electrode.
Sealed Burner Assemblies
Turn all controls
OFF betore removing the
burner paI'tS.
The round side burner caps and burner
heads can be lifted off, making them easy to
clean. The electrodes are not removable.
The owd center burner head and cap
assembly can be lifted off; making it easy
to clean. The burner electrode is not
removable.
W-'/_e-" Burnerhead
andcap
assemby
k, CAUTION: Do not operate
the
cooktop without all burner parts and grates in place.
Electrode
Front l eft, backright
and backleft burner
Burnerhead
Electrode - __
Burnerbase _/
Front r ightburner
The electrode of the spark igniter is
exposed when the burner head is
removed. When one burner is turned
to
LITE,
all the
burners
spark. Do not
attempt to disassemble
or clean
around any burner while another
burner is on. An electI_iC
shock
may
result, which could cause wm to knock
over hot cookware.
32