GE JGB910 Owner's Manual & Installation Instructions page 50

Installation of the range.
Read these instructions completely and carefully.
OuMity of Flames
The coinbustion qualiD' of burner flan/es needs to
be detem/ined visually.
(,4) Yellow flames--
Call for service
(B) Yellowtipson
outer cones--
Normal for LP gas
(C) Soft blue
flames--Normal for
natural gas
If burner flames look like (,4),carl for servlce.Normal burner
flamesshould look like (B) or (C),dependingon the type of gas
you use.
_A]th I,P gas, soIne yellow til)ping on otlter cones
is nomial.
[]
Check Ignition of Oven Burner
The oven is designed to operate quietly and
autoniaficallv: To oi)ei'ate the oven, press the
BAKE
pad and then press the nuniber pads until
350° al)peais in the display: Touch the START pad.
After 30-00 seconds, the oven burner will ignite
and burn until the set teInl)erature is reached.
The oven burner will continue to cycle on and
off as necessai_' to nlaintain the oven at the
teniperamre indicated by the display.
To check ignition of the broil burnei; touch the
BROIL HI/tO pad and then the START pad. _MteI"
30-90 seconds, the broil burner will ignite.
Electricignitionmodels
require electrical power to
ol)erate,
In case of a l)ower Otltnge, the ()veil
burnei_ on these niodels cannot be lit nlanuallv
with a nlatch. Gas will not flow unless the gh)w bar
is hot.
If the oven is in use when a power outage occuI_,
the burner will shut
off and cannot
be re-lit until
power is restored,
5O