Using Thegas Surfaceburners - GE JGB920 Owner's Manual And Installation Instructions

Using thegas surfaceburners.
Throughout this manual, features and appearance may vary from your model
Push the control knob in and turn it
to the LITEposition.
How to Light a Gas Surface Burner
Push [he ( ormo] knob in and turn it to the
UTE posidon.
You will heara little clickflgl noise--die
sound of the electric spark igniting the
burner.
Turf1 tile knob t(1 adjust tile flame size.
If die knob sm) s at UTE, h _dl] (:omirme
t(1 (:lick.
When one burner is turned to LITE all
the bm hers spmk.
1-)onot
attempt
to
disassemble o1 ( lear_ around ar_y burner
while anodler bmner is (m Ar_ ele( _ri(
shock may result, which could cm_se you
to knock over hot cookwme.
Sealed Gas Burners
The smaller burner (right rear position) will
We the best simmer resuhs, It offers predse
cooking pefibrmance fi/r delicate fitods,
such as statues or fi)ods which need to cook
over low heat fi)r a long time. It can be
turned (ht_/o a vet) htw simmer setting.
The largest burners are higher powered
than the others and will bring liquids to a
boil quicker.
How to Select Name Size
Forsafe handling of cookware, never let the flames
extend up the sides of the cookware.
Watch the flame, not the knob, as you
reduce heat. The tlmne size on a gas burner
should match the cookware you are using.
Anyflame larger than tile bottom of the
( ookwate is wasted and only serves to heat
the handle.
In Case of Power Failure
In case of a power tailure, you can light the
gas suflace burners on your range with a
mauh. Hold a lit match to the burner, then
push in and turn tile conuol knob tl1the
LITEposition. Use extreme caution when
lighting burners this way.
Surface burners in use when an electri(al
power f:,filure occurs _dll continue to
operate normally.
Before Lighting a Gas Burner
:_If drip pans are supplied with yt_ur range,
they should be used at all dines.
;_ Make sure all grates on the range are in
place betore using any burner.
After Lighting a Gas Burner
:_ Do not operate the burner fi)r an
extended period of time without
cookwme on the grate. The finish on
tile grate may chip without cookwme
to absorb the heat.
Be sure the burners and grates are cool
befi)re you place your hand, a pot holder,
cleaning cloths or other materials on
thetn.