GE JGB920 Owner's Manual And Installation Instructions page 48

Instal&tion of the range(cont.).
[] Electrical Connections
[] Usage Situations where Appliance
Power Cord will be Disconnected
Frequently.
Do not use an adapter plug in these situations
becmlse disconnecting of the power cord places
undue strain on tile a(btpter and leads to evemual
t_tilure of the adapter ground terminal. The
(ustomer should have the two-prong wall receptacle
replaced with a three-prong (grounding) receptacle
by a qualified elecuidan beiore using the appliance.
The installation of appliances designed tk)r
mobile home installation must conli)rm _dth the
Manutacmred Home Consu_lcfion and S_ely
Standard, Title 24 (FR, Pmt 3280 (Iormerly the
Federal Standard lot Mobile Home ( onstmction
and Sately, Title 24, HUD, Pmt 280) or, when such
smndmd is not applicable, the Smndmd tin
Manutacmred Home Installations, latest edition
(Manutacmred Home Sites, Comnmnifies and Set-
Ups), ANSI A225.1, latest edition, or with local
codes. In ( anada, mobile home installation nmst be
in accordance with the current CAN/CSA
Z240/MH Mobile Home Installation Code.
Electric Disconnect
I_o(ate dis(onne(t plug on tile range balk.
Pinch sides of connector and pull out of range
back.
[] Seal the Openings
Seal any openings in tile wall behind tile range and
in tile floor under tile range when hookups are
completed.
[] Check Ignition of Surface Burners
Operation of all cooktop and oven burners should
be checked after the range and gas supply lines have
been carefiflly checked for leaks.
ElectricIgnitionModels
Select a top burner knob and simultaneously push
in and unn to LifE position. You will hear a clicking
s(mnd indicating proper operation of tile spark
module. Once the ;fir has been purged flom the
supply lines, Nnners sh{mld light within 4 seconds.
After burner lights, rotate knob out of tile LITE
position. T U each burner in succession until all
burners have been checked.
43