GE JGB920 Owner's Manual And Installation Instructions page 37

Warming Drawer Rack
(lean tile rack _4tll detergent and water.
After (leaning, rinse the rack with dean
water and (h T _dth a (lean doth.
Warming Drawer Pan
The wamfing &awer has a removable pan
for easy deaning.
Rem{)ve the pan, using the side edge
handles and clean it with detergent and
water. After cleaning, rinse with clean wamr
and &T with a clean cloth. Replace the pan
in the wamfing &awer.
Removable Warming Drawer (on some mode/s)
Befine pet_bmfing any a_!jusunems,
cleaning or service, disconnect the range
electrical power supply at the househoM
disu'ibufion panel by rem_Mng tile fllse or
s_Mtching offthe circuit breaker, Make
sure the wanning _hawer heating element
is cool.
Most cleaning can be done with the &awer
in place. H_wever, tile drawer may be
rem{)xvd if finther cleaning is needed. Use
soap and wmm water to thoroughly clean.
Toreplacethe warming drawer:
[] Pla(e tile left (hmver rail around
tlle inner left rail guide and slide it in
slightly to hook it.
[] !qace tile fight &awer rail around tile
tuner fight rail guide and slide it in
slightly to hook it.
[] Slide tile &awer all tile way in.
Toremove the warming drawer:
[] Pull tile drawer straight out until it
stops.
[] Press tile left rail release down and
push tlle right rail release up, while
pulling tile drawer fi)iwald and flee.
97