Required Software; Installation Procedure - Ricoh Aficio MP 8001 Installation Manual

Required Hardware for Installation
PC / Laptop
Crossover cable or network access to the target MFP
SD Card Reader (only if installing using Method 2)

Required Software

1. Java Type VM Card at recommended version. (1 per device).
Java card update files with instructions are available on the TSC website.
http://tscweb.net/snoitulosorp/java_solutions.asp
2. User Account Limits Application software. (UsrActLim.zip)

Installation Procedure

1. Install the Java VM Card
Power OFF the MFP
Insert The Java VM Card into the service slot on the MFP.
Power on the MFP.
2. Configure SP Mode on MFP
Enter Service Program Mode (SP Mode)
Press System Sp
Go to SP 5113-1 Confirm that is set to 0
Go to SP 5113-2
Set to 1:Expansion device 1
Press OK
Exit
Exit
3. Confirm that User Authentication is OFF
Enter User Tools
Press System settings
Press Administrator Tools
Press Next
Select User Authentication Management
Confirm that is turned OFF
Press OK
Exit
Exit
Version 1.0
Contains Private and/or Proprietary Information.
May Not Be Used Or Disclosed Outside Ricoh Corporation Except Pursuant To A Written Agreement.
Ricoh Family Group Companies
PRIVATE/PROPRIETARY
User Account Limits Application
Installation Guide
Page 2 of 16