Chicago Electric 40432 Set Up And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Chicago Electric Manuals
  4. Grinder
  5. 40432
  6. Set up and operating instructions manual

Chicago Electric 40432 Set Up And Operating Instructions Manual

Flexible shaft grinder/carver
Hide thumbs
Table of Contents

Advertisement

Quick Links

SET up AND OpERATING INSTRuCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANuAL.
©
Copyright
1999 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
REV 06g; Manual Revised 09k
FLEXIBLE SHAFT
GRINDER/CARVER
Model
®
. All rights reserved. No portion of this manual or any artwork
40432

Advertisement

Table of Contents
loading

Related Manuals for Chicago Electric 40432

Summary of Contents for Chicago Electric 40432

  • Page 1 FLEXIBLE SHAFT GRINDER/CARVER Model 40432 SET up AND OpERATING INSTRuCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANuAL. © ® Copyright 1999 by Harbor Freight Tools .

  • Page 2: Important Safety Information

    NOTICE is used to SAVE THIS MANuAL address practices not Keep this manual for the safety warnings related to personal injury. and precautions, assembly, operating, CAuTION, without the inspection, maintenance and cleaning safety alert symbol, is procedures. Write the product’s serial number used to address practices not in the back of the manual near the assembly related to personal injury.
  • Page 3 ranges and refrigerators. There is an up or carrying the tool. Carrying increased risk of electric shock if your power tools with your finger on the body is grounded. switch or energizing power tools that have the switch on invites accidents. Do not expose power tools to rain or wet conditions.
  • Page 4 with the switch is dangerous and must Flex Shaft Grinder Safety Warnings be repaired. The rated speed of the accessory Disconnect the plug from the power must be at least equal to the source and/or the battery pack from maximum speed marked on the power the power tool before making any tool.

  • Page 5: Vibration Safety

    This product is not a toy. Keep it out of other reproductive harm. Wash hands reach of children. after handling. (California Health & Safety Code § 25249.5, et seq.) People with pacemakers should consult their physician(s) before use. The warnings, precautions, and Electromagnetic fields in close proximity instructions discussed in this instruction to heart pacemaker could cause...

  • Page 6: Double Insulated Tools: Tools With Two Prong Plugs

    Use tools with the lowest vibration when Double Insulated Tools: Tools with there is a choice. Two prong plugs Include vibration-free periods each day of work. Grip tool as lightly as possible (while still keeping safe control of it). Let the tool do the work.
  • Page 7 When using more than one extension Symbology cord to make up the total length, make sure each cord contains at least the Double Insulated minimum wire size required. (See Table Canadian Standards Association If you are using one extension cord for more than one tool, add the nameplate Underwriters Laboratories, Inc.

  • Page 8: Specifications

    Kinks or crimps in the shaft will result in SpECIFICATIONS inefficient tool performance. Electrical Input 120 V~ / 60 Hz / .5 A (No Load) Attach the Foot Control. Insert the Plug Motor Speed 15,000 RPM (No Load) (29) into the Female Plug (28) which Flexible Shaft 38”...

  • Page 9: General Operating Instructions

    General Operating Instructions TO pREVENT INjuRY FROM BuRNS: With normal use, the motor housing (7) will get hot. This is normal and not harmful to the tool. However, the hot surface of the housing may be harmful if touched or present a danger if it is within three (3) feet of flammable material.

  • Page 10: Maintenance And Servicing

    Using a small screwdriver, remove MAINTENANCE AND the Carbon Brushes (8). When you SERVICING remove the Carbon Brush screws, the Brush may spring out. Do not lose the Procedures not specifically Brush. If the brush does not spring out, explained in this manual must gently remove it using the tip of your be performed only by a qualified screwdriver.

  • Page 11: Parts List And Assembly Diagram

    pARTS LIST AND ASSEMBLY DIAGRAM part Description Qty. Holder Hanger Rubber Ring Screw Motor Housing Carbon Brush Stator Screw Gasket Rubber Ring Bearing Cover Screw Rotator Impeller Bearing Cover Screw Flexible Shaft Chuck Housing Bearing Set* Chuck Chuck Key Power Plug Foot Control Plug-Female Plug...

  • Page 12: Limited 90-Day Warranty

    To take advantage of this warranty, LIMITED 90 DAY WARRANTY the product or part must be returned to us Harbor Freight Tools Co. makes every with transportation charges prepaid. Proof effort to assure that its products meet of purchase date and an explanation of the high quality and durability standards, and complaint must accompany the merchandise.

Table of Contents