Specification ITEM DESCRIPTION Electrical Requirements 120V / 60 Hz 1.5 Peak Horsepower Double Insulated, Fan Cooled Motor Holding Capacity 2.2 Gallons Flex Hose Dimensions 1-5/8” diameter X 56-3/4” Long Overall Dimensions 11-1/4”W X 14-1/4”L X 14-3/4”H Weight 7.0 Lbs. Warning: For Indoor Use Only Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram.
Page 3
Do not overreach. Keep proper footing and balance at all times. Always use protection. Wear ANSI approved safety impact eye glasses when using this product. ANSI approved safety impact eye glasses are available from Harbor Freight Tools. When necessary, use hearing and breathing protection. Wear ANSI approved hearing protectors when using the Vacuum/Blower for extended time periods or using it in a noisy work area.
SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS DO NOT SUBMERGE THE MOTOR HOUSING (3) IN WATER OR OTHER LIQUIDS. Guard against Electric Shock. Always prevent body contact with grounded surfaces such as pipes, radiators, ranges, refrigerators, etcetera. Do not handle any part of the Vacuum/Blower with wet hands when the unit is plugged in to its electrical supply source.
Page 5
To Vacuum Dry Materials: Note: A dry bag (19) is necessary when vacuuming dry material. If the Bag is wet when vacuuming dry material, the Bag will clog quickly and become difficult to clean. If the Bag is wet, dry the Bag before performing dry vacuuming. See Figures A, B, and Assy.
Page 6
To Vacuum Liquids: For Vacuuming liquids it is necessary to remove the Rubber Band (18) and Bag (19). To do so, remove the Motor Housing (3) from the Container (20). Empty all debris from the Container. Remove the Rubber Band (18) and Bag from the Ball Basket (17).
INSPECTION, MAINTENANCE, AND CLEANING CAUTION: Always disconnect the Vacuum/Blower from its electrical supply source before performing and inspection, maintenance, or cleaning. Before each use, inspect the general condition of the Vacuum/Blower. Check for broken parts, damaged power cord, and any other condition that may affect its safe operation.
ASSEMBLY DRAWING Part 1 Part 2 Part 3 Part 16 Part 4 Part 17 Part 5 Part 18 Part 6 Part 8 Part 7 Part 19 Part 9 Part 10 Part 11 Part 12 Part 20 Part 13 Part 14 Part 21 Part 15 Part 22...