Chicago Electric 91212 Set Up And Operating Instructions Manual
Auto-darkening welding helmet with ansi-approved lens
Hide thumbs
Also See for 91212:
- Assembly and operating instructions manual (8 pages) ,
- Set up and operating instructions manual (11 pages) ,
- Assembly and operating instructions manual (9 pages)
Table of Contents
Advertisement
Quick Links
AUTO-DARKENING WELDING HELMET
with ANSI-Approved Lens
Models
SET Up AND OpERATING INSTRUcTIONS
NOTE: YOUR Helmet may appear different from the Helmet pictured in this
manual. Aside from the slight differences noted in this manual, the warnings,
operation instructions, and maintenance procedures will remain the same.
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
©
Copyright
2006 by Harbor Freight Tools
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Tools required for assembly
and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual revised 10c
91212, 91214, 94336, 94337
Distributed exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
®
. All rights reserved. No portion of this manual or any artwork
®
.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 91212
Summary of Contents for Chicago Electric 91212
- Page 1 AUTO-DARKENING WELDING HELMET with ANSI-Approved Lens Models 91212, 91214, 94336, 94337 SET Up AND OpERATING INSTRUcTIONS NOTE: YOUR Helmet may appear different from the Helmet pictured in this manual. Aside from the slight differences noted in this manual, the warnings, operation instructions, and maintenance procedures will remain the same.
-
Page 2: Important Safety Information
cAUTION, without SAVE THIS MANUAL the safety alert Keep this manual for the safety symbol, is used to address warnings and precautions, assembly, practices not related to operating, inspection, maintenance and personal injury. cleaning procedures. Write the product’s serial number in the back of the manual near SAFETY WARNINGS AND the assembly diagram (or month and year of pREcAUTIONS... - Page 3 Dress properly . Do not wear loose while taking drugs. If there is any clothing or jewelry as they can be doubt, do not weld. caught in moving parts. Protective Maintenance . For your safety, service gear is essential to protect against and maintenance should be performed welding rays, some examples are: a regularly only by a qualified technician.
-
Page 4: Specifications
• Do not make any modifications to WARNING either the Auto-Darkening Filter or the rest of the helmet, other than those specified in this manual. Do not use any replacement parts other than those specified in this manual. Unauthorized modifications INHALATION HAzARD: and replacement parts will void the Welding and plasma cutting produce... -
Page 5: Before First Use
SHADE GUIDE cHART Arc current (Amperes) Welding process Stick/Arc Mild Steel MIG (argon shielded) Mild Steel MIG, shielded) Aluminum MIG Flux Core Plasma Cutting Plasma Welding that they are secure in place. Check UNpAcKING for light tightness before each use. When unpacking, make sure that the Inspect all operating parts before each item is intact and undamaged. -
Page 6: Product Features
This Welding Helmet utilizes high pRODUcT FEATURES/ performance solar cells as power supply, OpERATION and has built-in battery(ies) as power At the moment the welding operation backup, see below. Under normal welding is started, the filter screen automatically conditions, users can expect a battery changes from clear to dark in only lifetime of more than 6 years. -
Page 7: Troubleshooting
TROUbLESHOOTING MAINTENANcE Irregular Darkening or Dimming REpLAcING THE LENS cOVER Headband has been set unevenly on FOR SKU 91212 AND 91214 the two sides of the helmet (unequal distances from the eyes to the filter’s lens). Reset headband to reduce the difference in distances to filter, if necessary. - Page 8 REpLAcING THE LENS cOVER Frame (1) FOR SKU 94337 AND 94336. Replace the Front Lens cover (2) if it is damaged (cracked, scratched, soiled or pitted). b. Pull off the Frame (1). Remove the protection film from both sides of the new Lens if it comes with the film on.
-
Page 9: Parts List And Assembly Diagram
pARTS LIST AND ASSEMbLY DIAGRAM IMpORTANT: parts are not necessarily interchangeable. When ordering parts, always specify which model they are for. part Description Q’ty part Description Q’ty Block Nut Frame (sku 94336 & 94667 only) Washer Front Lens Cover Adjustable Limitation Washer Auto-Darkening Filter Cartridge* Left Limitation Washer Shade Knob... -
Page 10: Limited 90-Day Warranty
To take advantage of this warranty, LIMITED 90 DAY WARRANTY the product or part must be returned to Harbor Freight Tools Co. makes every us with transportation charges prepaid. effort to assure that its products meet Proof of purchase date and an explanation high quality and durability standards, and of the complaint must accompany the warrants to the original purchaser that this...