Hardware Features - NETGEAR WN3000RP-100NAS User Manual

Hardware Features

WPS
PC to Extender
Status
Figure 1. Extender
The LEDs on the front show how the Extender is working:
WPS. This LED indicates a WPS wireless connection.
•
Solid green. There is wireless security (WPA or WPA2).
-
Blinking green. A WPS connection is in progress.
-
PC to Extender. The LED is lit when the Extender is connected to a PC.
•
Status. This LED is lit when the Extender is powered on.
•
Link Rate. This LED indicates a wireless connection between the Extender and the
•
router.
Green is best.
-
Amber is good.
-
Red is poor.
-
The side panel has the following features:
Ethernet port. You can use this for a wired connection to a computer or other device as
•
described in the User Manual.
Factory Reset button. To use this button, stick a paper clip into the reset hole and hold it
•
until the Status LED flashes.
WPS button. Press the WPS button to wirelessly connect the Extender to your
•
router or wireless adapter.
Device On/Off button. Turns the device on and off.
•
Universal WiFi Range Extender WN3000RP
Device On/Off button
WPS button
Factory Reset button
Ethernet port
Link Rate
Getting Started
5
Note: For best performance,
position antennas pointing up.