Advertisement
Quick Links
Advertisement
Related Manuals for Behringer C-1
Summary of Contents for Behringer C-1
- Page 1 User Manual STUDIO CONDENSER MICROPHONE Studio Condenser Microphone...
- Page 2 STUDIO CONDENSER MICROPHONE C-1 User Manual After each use, wipe the Important Safety microphone down with a soft cloth Instructions and place it back into its protective casing (included with the microphone). The small bag containing the moisture-absorbing crystals should remain in the casing to help keep your microphone dry.
-
Page 3: Power Supply
Your condenser mic C-1 needs a phantom power supply (+36 to +52 V). If your C-1 is connected to a microphone preamp and supplied with phantom power, the LED on the microphone lights up. BEHRINGER assumes no liability for any damage caused by a defective phantom power supply. Always mute the sound reinforcement system before you switch on the phantom power supply. -
Page 4: Audio Connection
STUDIO CONDENSER MICROPHONE C-1 User Manual If necessary, you can bend the microphone out of its vertical position by using the hinge on the microphone stand. ◊ Please make sure to handle the microphone shaft with attention and care to avoid damaging the screw thread. In no situation should you ever apply excessive force. - Page 5 STUDIO CONDENSER MICROPHONE C-1 User Manual 0° 340° 20° 0 dB -5 dB 320° 40° -10 dB -15 dB 300° 60° -20 dB -25 dB -30 dB 280° 80° -35 dB -40 dB 260° 100° 240° 120° 140° 220° 160°...
-
Page 6: Specifications
STUDIO CONDENSER MICROPHONE C-1 User Manual Specifications Transducer type condenser, 16 mm Polar pattern cardioid Connection: gold-plated balanced XLR connector Open circuit sensitivity -33 ± 2 dBV (0 dBV = 1 V/Pa) Frequency response 40 Hz - 20 kHz Max. SPL (1% THD @ 1 kHz)