Behringer Europower PMP6000 Manual

Powered Mixers
EUROPOWER
PMP6000/PMP4000
PMP1680S
1600-Watt 10/16/20-Channel Powered
Mixer with Multi-FX Processor and
FBQ Feedback Detection System
Ultra-compact 2 x 800-Watt
stereo powered mixers
(1600 Watt bridged mode)
Revolutionary Class-D amplifier
technology: enormous power,
incredible sonic performance and
super-light weight
Ultra-compact design at nearly
half the weight of conventional
powered mixers
PMP6000: 20-channel mixer section
features 12 mono and 4 stereo
channels plus separate CD/Tape
input/output
PMP4000: 16-channel mixer section
features 8 mono and 4 stereo
channels plus separate CD/Tape
input/output
PMP1680S: 10-channel mixer section
features 6 mono and 2 stereo
channels plus separate CD/Tape
input/output
PMP6000, PMP1680S: Dual studio-
grade 24-bit stereo FX processors
with 100 awesome presets including
reverb, chorus, flanger, delay, pitch
shifter and various multi-effects
PMP4000: Studio-grade 24-bit stereo
FX processor with 100 awesome
presets including reverb, chorus,
flanger, delay, pitch shifter and
various multi-effects
Revolutionary FBQ Feedback
Detection system instantly reveals
critical frequencies for easy
feedback removal
12/8 high-quality Mic Preamps with
switchable +48 V phantom power for
condenser microphones
The new BEHRINGER PMP Powered
Mixers (2 x 800-Watt stereo, 1600-Watt
bridged mode) produce even more
power than their predecessors while
maintaining a famously low weight
and high efficiency. These mixers
employ Class-D technology including
a new switch-mode power supply,
significantly reducing weight and heat.
The 20-channel PMP6000 features 12
built-in XENYX preamps, the 16-channel
PMP4000 features 8 built-in XENYX mic
preamps, and the 10-Channel PMP1680S
features 8 high-quality built-in mic
preamps. All three models feature
24-bit FX processors, stereo 7-band
graphic EQ and our renowned
FBQ Feedback Detection System.
What is Class-D Technology?
Instead of operating relatively
continuously like Class AB circuits,
Class-D amps switch on and off
thousands of times per second,
delivering power only when needed.
In other words, the amplifier is either
fully on or fully off, which significantly
reduces power losses from the output
devices given off as heat. Less heat means
our amps don't need massive heat sinks,
and that means we can make them lighter.
Our no-compromise design means the
new PMP mixers will deliver full power
with incredible fidelity all night long,
without the need for lengthy rest cycles.
When used in conjunction with
switching-mode power supplies,
which don't require huge and heavy
transformers, our Class-D amplifiers
provide tremendous dynamic punch and
superior fidelity. The resulting speaker
systems are much lighter, making them
easy to transport and set up.
Massive Mono or Stunning Stereo
Our latest PMP give you the choice
of 2 x 800-Watt stereo, 2 x 800-Watt dual
mono mode (giving you a mono version
Continued on next page