TP-Link TL-SC3230 Quick Installation Manual

Quick Installation Guide

Megapixel Surveillance Camera
Wireless N Megapixel Surveillance Camera
TL-SC3230/TL-SC3230N
MODEL NO.
2

Physical Description

Antenna *
Built-in Microphone
Lens & Focus Ring
Micro-SD Card Slot
Power/Wireless LED LAN LED
Audio Output Jack
Power Jack
LAN Port RESET Button
LED Status Description
O
The camera is powered o .
Power/
The camera nishes boot-up and is ready to serve. Power on
Solid Orange
Wireless
the camera, the LED will light up and then go o to booting
LED
process. After keeping o for several seconds, the LED will be
solid orange.
Flash Orange * The camera has been connected to a wireless network.
Solid Green No cable is linked to the camera.
LAN LED
Flash Green Data is being transmitted or received.
Button Description
While the camera is ready, press RESET button for at least 5 seconds and
RESET Button
release it. The camera will be restored to default settings and reboot
again.
* The Antenna and Flash Orange status are for TL-SC3230N only.
7106504101

Package Contents

The product model shown in this QIG is TL-SC3230N, as an example.
Power Adapter
TL-SC3230N Mounting Bracket
Megapixel Surveillance Camera
Wireless N Megapixel Surveillance Camera
TL-SC3230/TL-SC3230N
QIG Ethernet Cable Resource CD
(*The pictures are for reference only.)
System Requirement
The following operating systems are supported:
Windows 2000 Windows 2003 Windows XP
Windows Vista Windows 7
The following browsers are supported:
Internet Explorer 8 or higher
Safari Firefox Chrome
(*Internet Explore Browser is recommended.)
3

Hardware Connection

Ethernet Cable
1
Warning Before Installation
Do not keep the Camera exposed
to direct sunlight.
Do not place the Camera in high
humidity environments such as
in a kitchen.
Do not place the Camera where
there are high temperatures
such as near an oven.
Do not place the Camera near
devices that emit radio waves,
such as mobile phones.
WPS
Ethernet Cable
It is recommended to mount the Camera where objects often pass,
and the direction towards the door or passage is much better, see
the illustration below:
Connect the LAN port on Camera to the LAN Port of your
router or switch with an Ethernet cable.
Connect the power adapter cord to the Power jack.
Plug the power adapter into the power outlet.
Note:
Before proceeding, con rm that your PC is connected to your
Router and can access the Internet.
Make sure that your Router's DHCP feature is enabled. If not,
please refer to your Router's instruction to enable it.