System Restore; Application Recovery - HP VH677UA#ABA - Pavilion Dv6-1244sb Entertainment Support Manual

The number of CDs/DVDs in the recovery set depends on
your PC model. The program tells you the number of blank
discs needed to make the set. The process takes some time,
including up to 15 minutes per disc to verify that the
information written on the disc is correct.
You can quit the process at any time. The next time you run
the program, it begins where you left off.
To run the Recovery CD-DVD
Creator program:
1 Close any open programs. To close programs, click X in
the upper-right corner of each window.
2 Click Start on the taskbar.
3 Choose All Programs.
4 Choose PC Help & Tools.
5 Click HP PC Recovery CD-DVD Creator. The creator
window appears.
6 Follow the onscreen instructions. Label each disc as you
make it.
Store the System Recovery discs in a safe place.
Using the Recovery Tools CD
Your PC allows you to create (burn) a Recovery Tools CD.
After you make the HP PC Recovery Tools CD, you can
use it to:
•
Read instructions to use each utility on the Recovery
Tools CD.
•
Start the System Recovery program from the recovery
partition.
•
Remove the System Recovery partition from your PC hard
disk drive to increase space for data.
•
Create a new data partition on your PC hard disk drive.
•
Start the Microsoft Recovery Console (a utility from
Microsoft that can perform operating system diagnostics
and repairs).
WARNING: Before using the HP PC Recovery
Tools CD to change your hard disk drive,
make System Recovery CDs for your PC by
using the HP PC Recovery CD-DVD Creator
program. You cannot make System Recovery
CDs after you remove the system recovery
partition.
You must create (burn) the Recovery Tools CD before you
can use it.
To Create or to Start the Recovery Tools CD:
1 Click Start on the taskbar.
2 Choose All Programs.
3 Choose PC Help & Tools.
4 Click HP PC Recovery Tools CD. The tools window
appears.
5 Follow the onscreen instructions.
Store the Recovery Tools CD in a safe place.

System Restore

WARNING: Try System Restore before using
the HP PC System Recovery program.
If software on your hard drive accidentally gets erased or
damaged, first use the Microsoft System Restore feature in
Windows XP to restore the PC system and program settings.
System Restore returns the PC settings to a selected restore
point without affecting user programs or document files. For
more information, type System Restore into the Search box
in Help and Support.
To Start System Restore:
1 Close all open programs.
2 Click the Start button.
3 Choose All Programs.
4 Choose Accessories.
5 Choose System Tools.
6 Click System Restore.
Follow the onscreen instructions.

Application Recovery

Not all PC models include the Application
NOTE:
Recovery program. Perform steps 3 through 5 of the
following procedure. If HP Application Recovery appears in
the folder, your PC includes the program.
If an individual factory-installed application or driver
accidentally gets erased or damaged, you can reinstall the
software using the HP Application Recovery program (select
models).
NOTE: Do not use the Application Recovery program to
reinstall software programs that came on CDs or DVDs
included in the PC box. Reinstall these programs directly
from the CDs or DVDs.
9