2.
Disconnect the fan cable from the system board.
3.
Follow the sequence embossed on the heat sink to loosen the three Phillips 2.5 x 9.0 captive
screws (1) that secure the fan/heat sink assembly to the system board.
NOTE:
assembly and system board components, it might be necessary to move the fan/heat sink
assembly from side to side to detach the assembly.
4.
Remove the fan/heat sink assembly (2) by lifting straight up.
NOTE:
5.
Position the system board right-side up, with the front toward you.
72
Chapter 4 Removal and replacement procedures
Due to the adhesive quality of the thermal material located between the fan/heat sink
Steps 5 through 8 apply only to computer models equipped with the Intel processor.