Fan/Heat Sink Assembly - HP Presario CQ56-100 - Notebook PC Maintenance And Service Manual

Fan/heat sink assembly

Description
Fan/heat sink assembly (includes replacement thermal material) for use with UMA systems (AMD)
Fan/heat sink assembly (includes replacement thermal material) for use with UMA systems (Intel)
Before removing the fan/heat sink assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Hard drive (see
c. WLAN module (see
d. Memory module (see
e. Optical drive (see
f. Keyboard (see
g. Top cover (see
h. Display assembly (see
i. System board (see
Remove the fan/heat sink assembly (fan/heat sink appearance might vary):
NOTE: Steps 1 through 4 apply only to computer models equipped with the AMD processor.
1. Position the system board right-side up, with the front toward you.
Battery on page 36)
Hard drive on page
WLAN module on page
Memory module on page
Optical drive on page
Keyboard on page 46)
Top cover on page 49)
Display assembly on page
System board on page
37)
42)
44)
39)
59)
66)
Component replacement procedures
Spare part number
630722-001
606573-001
71