Speaker Assembly - HP Presario CQ56-100 - Notebook PC Maintenance And Service Manual

Speaker assembly

Description
Speaker assembly (includes cable)
Before removing the speaker assembly:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Hard drive cover (see
c. WLAN module (see
d. Keyboard (see
e. Top cover (see
Remove the speaker assembly:
1. Position the top cover upside down.
2. Remove the two Phillips 2.5×3.0 screws (1) that secure the speaker assembly to the top cover.
3. Remove the tape around the speaker cable.
4. Release the speaker from the plastic clip in the center (2).
5. Swing the right edge of the speaker assembly down (3) toward the TouchPad.
52 Chapter 4 Removal and replacement procedures
Battery on page 36)
Hard drive on page
WLAN module on page
Keyboard on page 46
Top cover on page 49)
37)
42)
)
Spare part number
620607-001