Top Cover - HP Presario CQ56-100 - Notebook PC Maintenance And Service Manual

Top cover

Description
Top cover (includes TouchPad board)
Before removing the top cover:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Hard drive cover (see
c. WLAN module (see
d. Keyboard (see
Remove the top cover:
1. Position the computer upside down, with the front toward you.
2. Remove four Phillips 2.0×3.0 screws in the battery bay, and remove ten Phillips 2.0×6.5 screws
on the base enclosure. The top cover screws are identified by a triangle icon embossed on the
base enclosure.
3. Postion the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
Battery on page 36).
Hard drive on page
WLAN module on page
Keyboard on page 46).
37).
42).
Component replacement procedures
Spare part number
620605-001
49