Memory Module - HP Presario CQ56-100 - Notebook PC Maintenance And Service Manual

Memory module

Description
1 GB, 1066 MHz DDR2 (Intel)
2 GB, 1066 MHz DDR2 (Intel)
1 GB, 1333 MHz, DDR3 (AMD)
2 GB, 1333 MHz, DDR3, (AMD)
Before removing a memory module:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn on
the computer, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the memory module:
1. Position the computer upside down, with the front toward you.
2. Loosen the three Phillips 2.5×5.0 captive screws (1) that secure the memory module
compartment cover to the computer.
3. Lift the outside edge of the memory module cover (2), and remove the cover (3). The memory
module compartment cover is included in the Plastics Kit, spare part number 595200-001.
NOTE:
44 Chapter 4 Removal and replacement procedures
Battery on page
Small tabs hold the cover in place. Firmly pull up on the cover to release the tabs.
Spare part number
619545-001
619546-001
621559-001
621566-001
36).