HP Presario CQ43-300 Maintenance And Service Manual page 95

●
Display assembly (see
●
System board (see
●
Fan/heat sink assembly (see
Remove the processor:
1. Use a flat-bladed screw driver to turn the processor locking screw one-half turn
counterclockwise (1), until you hear a click.
2. Lift the processor (2) straight up, and then remove it.
NOTE: The gold triangle (3) on the processor must be aligned with the triangle icon (4)
embossed on the processor socket when you install the processor.
Reverse this procedure to install the processor.
Display assembly on page
System board on page
Fan/heat sink assembly on page
66)
73)
80)
Component replacement procedures
87