Optical Drive Cable - HP Pavilion g6-2200 Maintenance And Service Manual

Before removing the processor, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5.
Remove the service door (see
6. Remove the optical drive (see
7.
Remove the hard drive (see
8. Remove the keyboard (see
9.
Remove the top cover (see
10. Remove the system board (see
11.
Remove the heat sink (see
Remove the processor:
1. Use a flat-bladed screw driver (1) to turn the processor locking screw one-half turn
counterclockwise, until you hear a click.
2. Lift the processor (2) straight up, and remove it.
NOTE:
on the processor socket when you install the processor.
Reverse this procedure to install the processor.

Optical drive cable

Description
Optical drive cable
84 Chapter 4 Removal and replacement procedures
Battery on page
Service door on page
Optical drive on page
Hard drive on page
Keyboard on page
Top cover on page
System board on page
Fan and heat sink on page
The gold triangle on the processor (3) must be aligned with the triangle icon embossed
40).
41).
42).
44).
51).
56).
74).
79).
Spare part number
682742-001
ENWW