Usb Board - HP Pavilion g6-2200 Maintenance And Service Manual

10. If it is necessary to replace the wireless antenna cables and transceivers:
a. Release the wireless antenna cables from the clips (1) built into the display enclosure.
b. Release the wireless antenna transceivers (2) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
c.
Remove the wireless antenna cables and transceivers.
Reverse this procedure to reassemble and install the display assembly.

USB board

Description
USB board (includes cable)
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5.
Remove the service door (see
6. Remove the optical drive (see
7.
Remove the hard drive (see
72 Chapter 4 Removal and replacement procedures
Battery on page 40).
Service door on page
Optical drive on page
Hard drive on page
41).
42).
44).
Spare part number
683547-001
ENWW