6.
If it is necessary to replace the webcam/microphone module:
a.
Detach and release the webcam/microphone module (1) as far as the webcam/microphone
module cable allows. (The webcam/microphone module is attached to the display enclosure
with double-sided tape.)
b.
Disconnect the webcam/microphone cable (2) from the webcam/microphone module.
c.
Remove the webcam/microphone module.
7.
If it is necessary to replace the display panel:
a.
Remove the six PM 2.5 × 6.0 screws that secure the display panel to the display enclosure.
ENWW
Component replacement procedures
69