Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the service door (see
Remove the hard drive:
1.
Disconnect the hard drive cable (1) from the computer.
2.
Lift the hard drive (2) to remove.
3.
Disconnect the hard drive cable (1). Remove the front bumper (2) and back bumper (3).
ENWW
Battery on page
40).
Service door on page
41).
Component replacement procedures
45