Security Menu; Diagnostics Menu; System Configuration Menu - HP 6720t - Mobile Thin Client Reference Manual

Select
Ignore changes and exit
Save changes and exit

Security menu

NOTE: Some of the menu items listed in this section may not be supported by your computer.
Select
Setup Password
Power-On Password
Password Options
Smart Card Security
System IDs

Diagnostics menu

Select
Memory Check

System Configuration menu

NOTE: Some of the listed System Configuration options may not be supported by your computer.
Select
Language (or press f2)
Boot Options
To do this
Cancel any changes entered during the current session and
exit Computer Setup.
Save any changes entered during the current session and exit
Computer Setup. Your changes go into effect when the
computer restarts.
To do this
Enter, change, or delete a setup password.
Enter, change, or delete a power-on password.
●
Enable/disable stringent security.
●
Enable/disable the password requirement on computer
restart.
Enable/disable smart cards
Enter a user-defined computer asset tracking number and
ownership tag.
To do this
Run a comprehensive test on system memory.
To do this
Change the Computer Setup language.
●
Set an f9, f10, and f12
● Enable/disable CD-ROM boot.
●
Enable/disable floppy boot.
●
Enable/disable internal network adapter boot and set the
boot mode (PXE).
●
Enable/disable MultiBoot, which sets a boot order that
can include most boot devices in the system.
Computer Setup menus
delay when starting up.
75