Displaying System Information (Fn+Esc); Initiating Standby (Fn+F3) - HP 6720t - Mobile Thin Client Reference Manual

Function
Display system information.
Initiate Standby.
Switch the image.
Display battery information
Decrease screen brightness.
Increase screen brightness.
To use a hotkey command on the computer keyboard, follow either of these steps:
● Briefly press the
– or –
● Press and hold down the
release both keys at the same time.

Displaying system information (fn+esc)

Press fn+esc
number.
In the Windows
as the BIOS date. On some computer models, the BIOS date is displayed in decimal format. The BIOS
date is sometimes called the system ROM version number.

Initiating Standby (fn+f3)

Press fn+f3
When Standby is initiated, the power lights blink and the screen clears. Your computer is disconnected
from the network.
CAUTION:
24 Chapter 5 Pointing devices and keyboard
fn key, and then briefly press the second key of the hotkey command.
fn key, briefly press the second key of the hotkey command, and then
to display information about system hardware components and the system BIOS version
fn+esc display, the version of the system BIOS (basic input-output system) is displayed
to initiate Standby.
To reduce the risk of information loss, save your work before initiating Standby.
Hotkey
fn+esc
fn+f3
fn+f4
fn+f8
fn+f9
fn+f10