Connecting To A Local Area Network - HP 6720t - Mobile Thin Client User Reference Manual

5. Click Modem.
6. Clear the check box for Wait for dial tone before dialing.
7. Click OK twice.
NOTE:
administrator for additional information.

Connecting to a local area network

Connecting to a local area network (LAN) requires an 8-pin, RJ-45 network cable (purchased
separately). If the network cable contains noise suppression circuitry (1), which prevents interference
from TV and radio reception, orient the circuitry end of the cable (2) toward the computer.
To connect the network cable:
1. Plug the network cable into the network jack (1) on the computer.
2. Plug the other end of the cable into a network wall jack (2).
WARNING!
modem or telephone cable into the RJ-45 (network) jack.
You must commit these changes in order for them to be saved. See your network
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a
Connecting to a local area network 39