Shutting Down The Computer - HP 6720t - Mobile Thin Client User Reference Manual

Shutting down the computer

CAUTION:
The Shut Down command closes all open programs, including the operating system, and then turns off
the display and computer.
Shut down the computer under any of the following conditions:
●
When you need to replace the battery or access components inside the computer
●
When you are connecting an external hardware device that does not connect to a USB port
● When the computer will be unused and disconnected from external power for an extended period
To shut down the computer, follow these steps:
1. Save your work and close all open programs.
2. Select Start > Turn Off Computer > Turn Off.
NOTE:
Down instead of Turn Off Computer.
If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try the
following emergency procedures in the sequence provided:
● Press ctrl+alt+delete. Then, click Shut Down > Turn Off.
●
Press and hold the power button for at least 5 seconds.
●
Disconnect the computer from external power and remove the battery.
Unsaved information will be lost when the computer is shut down.
If you have been registered to a network domain, the button you click will be called Shut
Shutting down the computer 17