Log In To The Range Extender - NETGEAR WN2000RPT - Universal WiFi Range Extender User Manual

Log In to the Range Extender

You can log in to the range extender to use the Smart Wizard or to use the menu selections
to view or change the extender's settings.
On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
1.
Internet Explorer.
In the address field of your browser, enter http://www.mywifiext.net. You are prompted to
2.
enter a user name and password:
If you do not see the log in prompt, make sure to include http:// when you type
http://www.mywifiext.net in your browser.
Type admin for the user name. The default password is password. NETGEAR
3.
recommends that you set a more secure password after you log in (see
on page 20).
If your range extender has an Internet connection, the Firmware Upgrade screen
•
displays (see
checks for new firmware at the NETGEAR website.
The Status screen displays with the menu on the left. This screen shows what the
•
current settings are for the range extender:
Menu
8 | Chapter 1. Getting Started
Upgrade the Firmware
Universal WiFi Range Extender WN2000RPT
on page 21), and the software automatically
Set the Password
Status screen