Connectors, Reset Buttons, Ports, And Label Information; The Wgx102 Wireless Unit - NETGEAR WGX102 - 54 Mbps Wall-Plugged Wireless Range Extender Reference Manual

Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102

Connectors, Reset Buttons, Ports, and Label Information

Each unit has various status indicators, a reset button, and a label with important information.
Familiarize yourself with these features of your product.

The WGX102 Wireless Unit

The front panel of the WGX102 contains the status lights described below.
Figure 2-1: WGX102 Front Panel
Table 2-1. Status Light Descriptions
Label
Power
HomePlug — AP Mode
Internet — Router Mode
Wireless
2-4
Activity
On Green Solid Power is supplied to the WGX102.
Blink Power on self test.
Off Power is not supplied to the WGX102.
On The HomePlug port (or Internet port in Router Mode) has
detected a link with an attached device.
Off No devices are attached on the Powerline network.
On The Wireless port is initialized and the wireless feature is
enabled.
Blink Data is being transmitted or received by the wireless port.
Off There is a problem with the device. See
"Troubleshooting".
202-10042-02 v1.1
Description
Chapter 8,
Introduction